
B-King Specification
26 03 2008 
| Engine Type | 4-stroke, 4-cylinder, liquid-cooled, DOHC | |
| Bore x Stroke | 81.0 mm x 65.0 mm | |
| Engine Displacement | 1340 cm3 (cc) | |
| Compression Ratio | 12.5 : 1 | |
| Carburetion | Fuel injection | |
| Oil capacity (overhaul) | 4.0L ( 1.6 US gal.) | |
| Ignition | Fully transistorized | |
| Starter System | Electric | |
| Lubrication System | Wet sump | |
| Transmission | 6-speed constant mesh | |
| Primary Drive Ratio | 1.596 (83 / 52) | |
| Final Drive Ratio | 2.388 (43 / 18) | |
| Frame Type | Twin-spar (aluminum-alloy) | |
| Rake / Trail | 25.5degrees / 107 mm (4.2 in.) | |
| Suspension | Front | Inverted telescopic, coil spring, oil damped, spring preload fully adjustable, rebound and compression damping force fully adjustable |
| Rear | Link type, coil-spring, oil damped, spring preload fully adjustable, rebound and compression damping force fully adjustable |
|
| Wheels | Front | 17 M/C x MT3.50, cast-aluminum-alloy |
| Rear | 17 M/C x MT6.00, cast-aluminum-alloy | |
| Brakes | Front | Radial mount, 4-piston calipers, 310 mm disc, twin |
| Rear | 1-piston caliper, 260 mm disc | |
| Tires | Front | 120/70ZR17M/C (58W), tubeless |
| Rear | 200/50ZR17M/C (75W), tubeless | |
| Fuel Tank Capacity | 16.5 L (4.4 US gal.) | |
| Overall Length | 2,220 mm (87.4 in.) | |
| Overall Width | 800 mm (31.5 in.) | |
| Overall Height | 1,085 mm (42.7 in.) | |
| Wheelbase | 1,525 mm (60.0 in.) | |
| Ground Clearance | 120 mm (4.7 in.) | |
| Seat Height | 805 mm (31.7 in.) | |
| Dry Weight | B-KING | 235 Kg (518 lbs.) |
| B-KING ABS | 239 Kg (526 lbs.) | |
Comments : 4 Comments »
Categories : motocycle
2007 Tokyo Auto Show: Mitsubishi Lancer Evolution X
26 03 2008 
Or maybe it’s the Mitsubishi Evolution X. Or it could be the Mitsubishi Evo. Or it could be the Mitsubishi Lancer Evolution X. But it’s not the Mitsubishi Galant Fortis, even though that is actually a Lancer. Why, pray tell, would Mitsubishi ever make such a confused mess of its car names? Just to give themselves a little extra challenge in the marketplace?
While Mitsubishi has shown a willingness and real aptitude at presenting itself with challenges, it turns out that the Lancer Evo name game nonsense is largely the fault of America. Harley-Davidson owns the names “Evolution” and its nickname “Evo,” which it uses for a line of engines. And, in the great outlaw tradition, Harley allegedly maintains a team of fierce lawyers intent on protecting the company’s rights to the moniker. And the “X” isn’t any part of the name in the U.S. as it is in Japan since Mitsubishi believes there would be confusion in the market because this new version is only the third here, not the tenth.
But Mitsu can call the 2008 Evo whatever it wants. Everyone will just call it the “Evo” anyway and no one is likely to confuse it with a V-twin. – kireii, h2o network adv, Indonesia
Comments : Leave a Comment »
Categories : cars
Membuat Teks Mengikuti Path Pada Photoshop
4 03 2008Dalam modul ini, kita akan belajar bagaimana cara membuat text yang mengikuti arah dari path yang telah kita buat.
Sekarang kita akan belajar membuat sebuah text yang akan mengikuti arah dari path yang akan kita buat menggunakan pen tool. Nantinya setelah anda mempelajari modul ini, anda dapat membuat kreasi text dengan bentuk-bentuk yang lain.
Ikuti panduan langkah demi langkah berikut ini :
- Buat sebuah lembar kerja baru terlebih dahulu.
- Aktif pada Pen Tool, kita akan membuat path dari text yang nanti akan kita buat. Anda dapat mengikuti path seperti yang ada dalam contoh berikut ini atau anda dapat membuat path sesuai dengan kreasi anda. Disini kita belajar dengan menggunakan path yang sederhana namun nantinya cara ini dapat anda aplikasikan dengan path dari bentuk-bentuk lainnya.
Setelah anda membentuk pathnya, anda dapat melakukan Ctrl+Klik pada area kosong sehingga sekarang path anda akan seperti di bawah ini.

- Aktif pada Text Tool, klik pada path dimana anda ingin mulai menulis text dan ketikkan kalimat anda dan text akan mengikuti arah dari path yang telah kita buat sebelumnya.

- Setelah selesai anda dapat menghapus path yang sudah tidak digunakan.
Caranya : Pada Window Paths, hapus Work Path.
Bila sebelumnya anda belum mengeluarkan Window Paths anda, anda dapat mengeluarkannya terlebih dahuli. Caranya : Pilih menu Window > Paths.

- Selesai.

(sumber : photoshop21.com/membuat-text-mengikuti-path.html)
posting by : kireii/JSC-215
Comments : Leave a Comment »
Categories : photoshop
JOROK TAPI PENTING
4 03 2008bacanya jangan sambil makan yaCh….!!!!

Comments : 4 Comments »
Categories : knowledge